Vacuum Multi-Function Mixer for Waterproof Coatings
Product Description
Designed Around Your Mixing Challenges
Difficult-to-Mix High-Viscosity Materials
The low-speed frame agitator provides controlled bulk mixing while the scraper system helps improve material movement along the vessel walls and bottom.
Powder Dispersion
A separate high-speed dispersing system provides intensive shear for faster and more uniform dispersion.
Air Entrapment
The closed vessel is equipped with a vacuum system capable of reaching at least -0.09 MPa for vacuum processing and deaeration.
Difficult Discharge
This system is supplied with a dedicated hydraulic pressure discharge machine for controlled material discharge.
One Mixer - Multiple Processing Functions
Low-Speed Mixing
11 kW low-speed mixing motor
Frame-type agitator with PTFE wall and bottom scrapers for effective bulk mixing.
High-Speed Dispersion
15 kW high-speed disperser
Two toothed dispersing discs provide intensive dispersion with speeds up to 1,440 rpm.
Vacuum Processing
Vacuum down to -0.09 MPa
Designed for closed-vessel vacuum processing and air removal.
Hydraulic Discharge
Integrated pressure discharge
A dedicated hydraulic pressure unit helps discharge high-viscosity materials after mixing.
Built-In Safety and Protection
Emergency Stop
Pressing the emergency stop immediately stops the equipment.
Vacuum Interlock
The lifting system cannot raise the crossbeam until the vessel has returned to atmospheric pressure.
Vacuum Oil Backflow Protection
We stand for fair and affordable pricing policy and we have very beneficial regular discounts.
Motor & Drive Protection
The variable frequency drive provides protection against overload, overcurrent, overvoltage, leakage and phase loss.
Hydraulic Pressure Discharge for High-Viscosity Materials
After mixing, high-viscosity waterproof coatings can be difficult to remove from the mixing vessel by gravity alone.
For this reason, the system is supplied with an SXDYJ-250 hydraulic pressure discharge machine.
The pressure discharge unit uses a hydraulic cylinder and matching pressure plate to push the material out of the vessel, providing a more practical solution for viscous coating materials.
Machine in Action
Watch the factory test of Karvil Machinery's 250L vacuum multi-function mixer, designed for waterproof coating and other demanding industrial mixing applications.
This system combines low-speed mixing, high-speed dispersion and vacuum processing in one integrated machine.
Contact Us for Custom Requirements & Free 3D Layout
Applications
Projects
Trusted by Global Manufacturers in 50+ Countries. From silicone to adhesives, see how our Sigma Kneaders are solving complex mixing challenges for industry leaders worldwide.
Services
LABORATORY TEST
Our modern, fully equipped technical center is at your disposal. We welcome you to test your products to experience the advantages of our industrial mixers firsthand.
PROFESSIONAL ENGINEER
Specializing in mixers, grinding, and recycling machines, Karvil's experienced engineering team constantly explores new technologies to create perfect solutions for you.
DIRECT FACTORY
FAQ
Can this mixer be used for waterproof coatings?
Yes. This specific 250L system was designed for processing roof waterproof coating materials and combines low-speed mixing, high-speed dispersion and vacuum processing.
Does the mixer have vacuum capability?
Can it handle high-viscosity materials?
What is the difference between the mixer and disperser?
Can the mixer be customized?